Architectural vinyl for commercial interiors
Don't replace it.
Resurface it.
We modernize doors, elevators, walls, and millwork with architectural film. Same structure. New finish. The property stays open.
Trusted on Class-A Commercial, Healthcare & Hospitality Properties
Surfaces we resurface
A new look for the surfaces you already have.
Architectural film goes where replacement is too slow and too expensive: doors, elevator cabs, landings, millwork, walls, ceilings, and storefronts.
Elevator Interiors
Cab walls and panels. Typically $5,000–$10,000 vs. $50,000+ to replace a cab. Most cabs take 1–2 days.
Elevator Landings
Landing doors, frames, and lobby surrounds. Hotels and offices stay open.
Commercial Doors
Guest-room, corridor, and fire-rated doors. Typically $350–$600 per door vs. $980–$1,900 to replace.
Casework & Millwork
Reception desks, cabinets, and built-ins. Rebrand overnight without new carpentry.
Wall Surfaces
Corridor and lobby walls, without a renovation close.
Storefront / Columns
Columns, frames, and facade elements. The business stays open.
Capital expenditure saved for clients
$20M+
Capital expenditure saved for clients
12K+
Premium commercial doors resurfaced
36K+
Hours of operational time secured for clients
Who we serve
Built for occupied buildings.
See the transformation. Keep the structure.
Drag any slider below to compare the original substrate with the final Engineered Group architectural finish.
After
BeforeCommercial Doors
Disney Contemporary ResortDisney Contemporary Resort · Hospitality
Class A fire-rated architectural finish applied over existing commercial doors in place. Zero tear-out, under 1 hour per leaf.
After
BeforeElevator Cabs & Landings
Pier 66 Luxury ComplexPier 66 Luxury Complex · Fort Lauderdale
Transformed cab interior walls and returns with bronze fluted finish without removing the cab from service for weeks.
After
BeforeLobby & Atrium Walls
Maitland ColonnadesMaitland Colonnades · Class-A Office
Existing atrium substrate resurfaced with architectural film to achieve a modern stone look without dust or dumpster waste.
After
BeforeStructural Columns
Commercial Airport & Transit HubCommercial Airport & Transit Hub
High-traffic column surfaces converted into matte fingerprint-resistant architectural accents without structural alterations.
Have a specific surface in mind?
Send us a photo, blueprint, or spec sheet. Our team evaluates substrates within 24 hours and provides a preliminary cost comparison against replacement.
Two ways to get a "new" surface.
Traditional Replacement
A- Demolition
- Disposal
- Replacement material
- Potential fabrication lead times
- Additional trades
- Construction debris
- More disruption
- Functional material discarded
Engineered Resurfacing
B- Existing substrate preserved
- Premium architectural finish applied
- Reduced demolition
- Reduced waste
- Fewer project variables
- Faster transformation potential
- Dramatically lower disruption
- Premium finished appearance
If both options can produce the design you want — which one should you price first?
1,000+ ways
to change a surface.
Premium architectural materials — installed by specialists. Not a vinyl wrap. An architectural finish system.
We Have A Finish For That
Endless Design Possibilities
Recent Orlando Project Spotlights
Orlando, FL
One Biscayne Tower
Refreshed elevator doors and architectural resurfacing
Orlando, FL
Emerald Tower Condos
Architectural door refinishing and lobby accents
Orlando, FL
Radice Corporate Center
Value-engineered lobby renovation & wall surfaces
Orlando, FL
Amrit Ocean Resort
Event space & furniture refresh with Koroseal Reatec
Manufacturer families
Finish families
Demolition has a
second price tag.
The proposal tells you what construction costs. It doesn't always tell you what disruption costs — the elevator out of service, the corridor closed, the occupied floor turned into a job site.
Tenant experience
What happens when corridors, elevators or shared spaces become construction zones?
Operations
What does it cost when spaces cannot operate normally?
Schedule
What happens when replacement materials or fabricated components miss their delivery date?
Coordination
How many vendors, trades and schedules are required to complete the refresh?
Waste
Why pay to demolish and dispose of a structurally sound surface just to recreate it?
Capital redirect
How much of your renovation budget is spent removing materials that still function — instead of on the finishes people actually see?
Architectural resurfacing asks a different question:
"Can we use what is already there?"
What could replacement really be costing you?
A quick, conceptual scope. Engineered Group reports that qualifying architectural finishing projects can save clients up to 60% compared with full tear-out and replacement.
Savings vary by substrate, scope, materials and site conditions. Project evaluation required. This is not a quote.
Potential savings
Up to 60%
vs. full renovation on qualifying projects.
Tell us a little more to see if your project qualifies.
From existing to reimagined.
Show us the project
Upload plans, drawings, specifications or photos.
We evaluate the surfaces
Engineered Group identifies viable resurfacing and architectural finish opportunities.
Compare your options
Receive finish recommendations, project considerations and pricing.
Select your finish
Review physical samples and available architectural finishes.
Engineered Group installs
Qualified installations are performed by Engineered Group's team.
Reopen the space
A transformed environment — without unnecessary demolition.
Before you approve the tear-out.
The technical answers commercial decision-makers need before committing the budget.
In many cases, yes. Where the existing substrate is structurally sound, clean and suitably prepared, premium architectural films can be applied directly over elevators, doors, walls, millwork, columns and glass. A field evaluation confirms suitability.
Engineered Group reports that qualifying projects can save clients up to 60% compared with full tear-out and replacement. Savings vary by substrate, scope, materials and site conditions — a project evaluation is required.
Per manufacturer specifications, interior architectural finishes can offer up to a 12-year lifespan. Actual performance depends on application, traffic and environmental conditions.
Resurfacing is typically far less disruptive than demolition and replacement. Work is often performed with the space occupied, after hours, or in phases — and can avoid taking elevators, corridors or floors out of service.
Yes. Elevator cabs, doors and surrounds are common candidates for resurfacing, often avoiding a full cab replacement and the associated downtime.
Yes. Existing hollow-metal or wood doors can be resurfaced in wood, metal, stone or contemporary finishes — frequently without replacing the leaf or frame.
It often is. Low odor, low dust and phased installation make resurfacing well suited to occupied hospitality, healthcare and corporate environments where disruption must be minimized.
Over 1,000 patterns across wood, stone, metal, textile, solid colors, decorative glass and specialty patterns — from manufacturers including 3M DI-NOC, 3M Fasara, Belbien, Koroseal Reatec, LX Benif and Samsung SOIF.
Yes. Engineered Group supports architects with specifications, constructability guidance and finish alternatives that preserve the design intent.
Yes. Physical samples are available so teams can evaluate material, finish and color in the actual project environment before commitment.
Yes. Share plans, drawings, finish schedules or bids and Engineered Group will identify which surfaces may be candidates for resurfacing instead of replacement.
Engineered Finishes provides commercial architectural resurfacing and installation across the Greater Orlando area and Central Florida.
No. Resurfacing is appropriate only where the existing substrate is sound and suitable. Engineered Group evaluates each surface and recommends accordingly.
Often. A photograph plus basic dimensions can be enough for an initial assessment; a field evaluation confirms scope.
Yes. If a replacement quote is over budget or struggling on lead times, Engineered Group can review it and identify where resurfacing may reduce cost, time or disruption.
Before you approve the tear-out,
ask one more question.
If your doors still work… if the elevator cab is structurally sound… if the millwork is still functional… if the glass doesn't actually need replacing — why spend the project's time and budget demolishing it simply to achieve a new appearance?
There may be cases where replacement is absolutely the right answer. But before you commit the budget, wouldn't you want to know what the alternative costs?
No obligation. Commercial projects throughout Orlando & Central Florida.